Manufacturer for Pu Binder For Bonding Scrap Foam - Doncool 103 CP/IP base blend polyols – INOV
Manufacturer for Pu Binder For Bonding Scrap Foam - Doncool 103 CP/IP base blend polyols – INOV Detail:
Doncool 103 CP/IP base blend polyols
INTRODUCTION
Doncool 103 is blend polyols uses CP or CP/IP as blowing agent, which applies to refrigerators, freezers, and other insulation products. The characteristics of the products are as follows
1. Excellent flow ability, the density of the foam is well-distributed, and the thermal conductivity is low
2. Excellent low-temperature dimensional stability and good cohesiveness;
3. Demoulding time is 6-8 minutes.
PHYSICAL PROPERTY
Appearance |
Pale yellow transparent liquid |
Hydroxyl value mgKOH/g |
360-420 |
Dynamic viscosity(25℃) mPa.S |
3000-4000 |
Specific gravity (20℃) g/ml |
1.06-1.08 |
Storage temperature ℃ |
10-25 |
Pot life Month |
6 |
RECOMMENDED RATIO
|
pbw |
Doncool 102 |
100 |
CP or CP/IP |
12-14 |
Isocyanate |
136-142 |
TECHNOLOGY AND REACTIVITY (the actual value varied as per process conditions)
|
Manual mixing |
High pressure machine |
Material Temperature ℃ |
20-25 |
20-25 |
Mould Temperature ℃ |
35-40 |
35-40 |
Cream time s |
12-16 |
8-12 |
Gel time s |
75-85 |
50-70 |
Tack free time s |
100-120 |
70-100 |
Free density kg/m3 |
25-26 |
24-25 |
FOAM PERFORMANCES
Mold density | GB/T 6343 | ≥35kg/m3 |
Closed-cell rate | GB/T 10799 |
≥90% |
Thermal conductivity (15℃) | GB/T 3399 | ≤22 mW/(m.K) |
Compression strength | GB/T8813 | ≥150kPa |
Dimensional stability 24h -20℃ | GB/T8811 |
≤0.5% |
24h 100℃ |
≤1.0% |
The data provided above are typical value, which are tested by our company. For our company’s products, the data included in the law do not have any constraints.
Product detail pictures:
Related Product Guide:
To continuously increase the administration process by virtue of the rule of "sincerely, good religion and excellent are the base of company development", we commonly absorb the essence of linked goods internationally, and continually build new solutions to fulfill the requires of shoppers for Manufacturer for Pu Binder For Bonding Scrap Foam - Doncool 103 CP/IP base blend polyols – INOV , The product will supply to all over the world, such as: Mauritius, Norway, Finland, Customer's satisfaction is always our quest, creating value for customers is always our duty, a long term mutual-beneficial business relationship is what we are doing for. We are an absolutely reliable partner for yourself in China. Of course, other services, like consulting, can be offered too.
By Natalie from Colombia - 2018.09.29 17:23
The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.
By Bess from Slovakia - 2017.09.28 18:29