New Arrival China Doncool 103 Cp/Ip Base Blend Polyols - Doncool 103 CP/IP base blend polyols – INOV
New Arrival China Doncool 103 Cp/Ip Base Blend Polyols - Doncool 103 CP/IP base blend polyols – INOV Detail:
Doncool 103 CP/IP base blend polyols
INTRODUCTION
Doncool 103 is blend polyols uses CP or CP/IP as blowing agent, which applies to refrigerators, freezers, and other insulation products. The characteristics of the products are as follows
1. Excellent flow ability, the density of the foam is well-distributed, and the thermal conductivity is low
2. Excellent low-temperature dimensional stability and good cohesiveness;
3. Demoulding time is 6-8 minutes.
PHYSICAL PROPERTY
| Appearance |
Pale yellow transparent liquid |
| Hydroxyl value mgKOH/g |
360-420 |
| Dynamic viscosity（25℃） mPa.S |
3000-4000 |
| Specific gravity (20℃) g/ml |
1.06-1.08 |
| Storage temperature ℃ |
10-25 |
| Pot life Month |
6 |
RECOMMENDED RATIO
|
|
pbw |
|
Doncool 102 |
100 |
| CP or CP/IP |
12-14 |
| Isocyanate |
136-142 |
TECHNOLOGY AND REACTIVITY (the actual value varied as per process conditions)
|
|
Manual mixing |
High pressure machine |
| Material Temperature ℃ |
20-25 |
20-25 |
| Mould Temperature ℃ |
35-40 |
35-40 |
| Cream time s |
12-16 |
8-12 |
| Gel time s |
75-85 |
50-70 |
| Tack free time s |
100-120 |
70-100 |
| Free density kg/m3 |
25-26 |
24-25 |
FOAM PERFORMANCES
| Mold density | GB/T 6343 | ≥35kg/m3 |
| Closed-cell rate | GB/T 10799 |
≥90% |
| Thermal conductivity （15℃） | GB/T 3399 | ≤22 mW/(m.K) |
| Compression strength | GB/T8813 | ≥150kPa |
| Dimensional stability 24h -20℃ | GB/T8811 |
≤0.5% |
|
24h 100℃ |
≤1.0% |
The data provided above are typical value, which are tested by our company. For our company’s products, the data included in the law do not have any constraints.
Product detail pictures:
Related Product Guide:
Usually customer-oriented, and it's our ultimate focus on to be not only by far the most reliable, trustable and honest provider, but also the partner for our customers for New Arrival China Doncool 103 Cp/Ip Base Blend Polyols - Doncool 103 CP/IP base blend polyols – INOV , The product will supply to all over the world, such as: Bangladesh, El Salvador, Serbia, Our items have national accreditation requirements for qualified, high quality products, affordable value, was welcomed by people today all over the world. Our goods will continue to enhance within the order and look forward to cooperation with you, Should any of these products be of interest to you, please letus know. We are going to be content to offer you a quotation up on receipt of your detailed needs.
By Judith from Panama - 2017.06.19 13:51
Superb technology, perfect after-sales service and efficient work efficiency, we think this is our best choice.
By Hannah from Mauritius - 2018.09.29 13:24
