China New Arrival China Polyurethane Shoe-Sole Resin - DSPU-601 – INOV Manufacturer and Supplier

New Arrival China Polyurethane Shoe-Sole Resin - DSPU-601 – INOV

Short Description:

Product Detail

Product Tags

Feedback (2)

We have been proud from the higher consumer gratification and wide acceptance due to our persistent pursuit of high quality both on product or service and service for Conventional Polyol, Polymeric Mdi, Polyurethane Mould System, Should further information be required, please contact us at any time!

New Arrival China Polyurethane Shoe-Sole Resin - DSPU-601 – INOV Detail:

DSPU-601

INTRODUCTION

DSPU-601 is two-component polyurea spray type combination, which is used in a variety of base material protection. 100% solid content, no solvents, no volatile, little or no odor, strictly comply with the VOC limit standard, belongs to the environmentally friendly materials.

PHYSICAL PROPERTIES

Item	Unit	Polyether component	Isocyanate component
Appearance		viscous liquid	viscous liquid
Density（20℃）	g/cm3	1.02±0.03	1.08±0.03
Dynamic Viscosity（25℃）	mPa·s	650±100	800±200
shelf life	month	6	6
Storage Temperature	℃	20-30	20-30

PRODUCT PACKAGING

200kg /drum

STORAGE

B component (isocyanate) is moisture sensitive. Unused raw materials should be stored in a sealed drum, avoid moisture intrusion .A component (polyether) should stir well before use.

PACKAGING

DTPU-401 is sealed in 20kg or 22.5kg pails and transported in wooden cases.

POTENTIAL HAZARDS

Part B (isocyanates) stimulate the eye, respiratory and skin through breathing and skin contact, and possibly sensitization.

When contact part B ( isocyanates), necessary preventive measures should be taken according to material safety date sheet (MSDS).

WASTE DISPOSAL

With reference to the material safety date sheet (MSDS) of the product, or deal with it in accordance with local laws and regulations.

PROPOSAL OF PROCESS

	Unit	Value	Test Methods
Mix ratio	By volume	1:1(A:B)
GT	s	5-10	GB/T 23446
Surface dry time	s	15-25	GB/T 23446
Temperature of material -part A -part B	℃	65-70
Pressure of material -Part A -Part B	PSI	2500

PHYSICAL PROPERTIES OF FINISHED PRODUCT

	DSPU-601	Unit	Test Methods
Hardness	≥80	Shore A	GB/T 531.1
Tensile Strength	≥16	MPa	GB/T 16777
Elongation at break	≥450	%	GB/T 16777
Tear strength	≥50	N/mm	GB/T 529
impervious	℃		GB/T 16777
Bibulous rate	≤5	%	GB/T 23446
solid content	100	%	GB/T 16777
Adhesive strength, dry base material	≥2	Mpa	GB/T 16777

The data provided above are typical value, which are tested by our company. For our company’s products, the data included in the law do not have any constraints.

Product detail pictures:

Related Product Guide:

With our rich experience and considerate services, we have been recognized as a reliable supplier for many international buyers for New Arrival China Polyurethane Shoe-Sole Resin - DSPU-601 – INOV , The product will supply to all over the world, such as: America, Greece, Estonia, We are looking forward to cooperating closely with you to our mutual benefits and top development. We guaranteed quality, if customers were not satisfied with the products' quality, you can return within 7days with their original states.

Flexible Packaging Adhesives

Mattress And Sofa Foam System

Ms Sealant 920

Ms Sealant 930

Ms Sealant&Ms Polymer

Polyurethane Foam Insole System

Polyurethane Shoe-Sole Resin

Room Temperature Curing System

Sealant

Water Permeable Running Track

Customer service staff and sales man are very patience and they all good at English, product's arrival is also very timely, a good supplier.

By Natividad from Turin - 2018.12.25 12:43

This supplier's raw material quality is stable and reliable, has always been in accordance with the requirements of our company to provide the goods that quality meet our requirements.

By Carol from Pakistan - 2018.05.15 10:52

Write your message here and send it to us