Iimveliso ze-Inov Polyurethane Mold Adhesive for Production Molds
Inkqubo yeglue yokubumba yePU
IIMPAWU
Faka endaweni yerabha yeSilicon ukwenza ukubumba "kwelitye lenkcubeko". Iipropathi ezigqwesileyo zokusetyenzwa, ukunyangwa okubandayo, ixesha elifutshane lejeli, kunye nokulawula imibala ngokongeza i-pigment. Ngokukhethekileyo isetyenziselwa ukubumba izihlangu.
Ukuchasana kakuhle kwe-abrasive, ukuxhathisa kwe-hydrolysis, okucacileyo, ukomelela okulungileyo, ubungakanani obuzinzile beemveliso ezigqityiweyo.
INGCACISO
| B | Uhlobo | I-DM1295-B | I-DM1260-B | I-DM1360-B | |||
| Imbonakalo | Ulwelo olungenambala okanye olutyheli olukhanyayo | ||||||
| Viscosity (30℃) mPa·s/ | 670±150 | 1050±150 | |||||
| A | Uhlobo | I-DM1260-A | DM1270-A | I-DM1280-A | DM1290-A | DM1250-A | DM1340-A |
| Imbonakalo | Ulwelo olumthubi olukhanyayo | ||||||
| Viscosity (30℃)/mPa·s | 1700±200 | 3600±200 | 1300±200 | ||||
| Umlinganiselo A:B (umlinganiselo wobunzima) | 1.4:1 | 1.2:1 | 1:1 | 0.7:1 | 1:1 | 1:0.6 | |
| Ubushushu bokusebenza/℃ | 25-40 | ||||||
| Ixesha lejeli (30℃)*/min | 13–14 | 13–14 | 6~8 | 6~7 | 15–16 | 16–17 | |
| Imbonakalo | Ulwelo olumthubi olukhanyayo | ||||||
| Ubunzima (unxweme A) | 60±3 | 70±2 | 80±2 | 90±2 | 50±3 | 40±3 | |
ULAWULO OLUZENZAKALELAYO
Imveliso ilawulwa yinkqubo ye-DCS, kunye nokupakishwa ngomatshini wokuzalisa ngokuzenzekelayo. Iphakheji yi-200KG/DRUM Okanye 20KG/DRUM.
